Hot Wire TIG Cladding System (Split-Type)
Efficient Compact Welding System
- Compact Design: The equipment features a compact structural design that effectively saves space.
- Efficient Operation: It maintains efficient operation even in confined working environments.
- Versatile Adaptability: This design allows the equipment to flexibly adapt to various working environments.
- LENGTH*WIDTH*HEIGHT:3200mm*2000mm*4160mm
Rotary Table
- This section mainly consists of a frame, servo motor, rotary disc, conductive brush, gear-type rotary support, and planetary reducer.
- The servo motor drives the gear transmission through the reducer, causing the rotary disc on the rotary support to rotate, which enables the overall rotation.
- Below the rotary disc, a set of welding current circuit brushes is installed, which frictionally contacts the rotary disc during rotation to ensure a smooth welding electrical circuit. The welding power source adjusts various parameters of the motor based on different positions during the welding process to control the welding speed in each section.
Scope of Application
Base Material:
Applicable base materials include A105, A350 LF2, A694 F42-F70, AISI 4130, 30CrMo, SS304/304L, SS316/316L, SS410, F51, F55, as well as cast and forged materials such as WCB, LCB, or pipe base materials.
Weld Consumables:
Welding materials consist of ERNiCrMo-3, ERNiFeCr-1, ER316L, ER2594, ERCCoCr-E, ERCCoCr-A, ERNi1, ERCuNi, and additional wires.
Clad Thickness:
The clad thickness is 1-3mm per layer, allowing for multilayer cladding. The standard clad thickness will be 3.2mm, with a dilution rate of FL+2mm less than 5%.
Quality Requirements:
Liquid penetrant testing shall be conducted in accordance with ASTM E165 and ASTM V requirements. The first-time yield for intersection surface cladding shall be greater than 95%; bore or flat surface cladding shall exceed 98%; and ring groove cladding shall exceed 96%.
Welding Process:
The welding process utilized is automatic TIG hot wire welding.
Welding Position:
Typically, the welding positions are 2G or 1G.
welding torch
The water-cooled cladding welding torch is designed with the following features:
-
Adjustable Angle: The torch can be adjusted to accommodate various welding surfaces of the workpiece, enhancing versatility in different applications.
-
Stable Cladding: It is specifically engineered to achieve stable cladding on the inner wall, ensuring consistent quality throughout the welding process.
-
Water-Cooling System: To support extended welding operations, the torch utilizes an effective water-cooling system, preventing overheating during prolonged use.
-
Component Composition: The welding torch consists of several key components, including:
- Water and electrical conduit
- Gas line
- Water inlet pipe
- Distributor
- Nozzle
- Tungsten electrode holder
-
Durable and Lightweight Construction: The torch is built to be robust yet lightweight, providing both durability and ease of handling during operation.
Pipeline TIG Cladding Power Supply and Equipment
The TIG welding power supply is the heart of the cladding solution. Through a human-machine interface, MYD’s multifunctional, computer-programmable welding power supply allows for precise control of current intensity and motion. The intelligent welding workstation offers:
-
Duty Cycle: A 100% duty cycle at currents ranging from 300 to 550 A, depending on the specifics of the application.
-
High-Performance Programming System: Capable of creating applications tailored for cladding.
-
Peripheral Control: The ability to control the peripheral equipment required for automated welding systems.
The open structure of the MYD series power supplies enables the adaptation and addition of extra axes to program and control all movements in automated cladding, including linear and circular motions. The design of the instruments and control systems is intended to guide the entire setup through all stages of the automated TIG cladding process.
Temperature Control Cooling Water Tank
The temperature control cooling water tank consists of components such as a high-efficiency condenser, compressor, fan motor, thermostat, and water detection sensor. It is an essential auxiliary device for cooling the welding torch during automated welding processes (such as plasma) and high-load continuous operations.
Main Technical Parameters
- Rated Power Supply Voltage: 1×220V / 50Hz (Fluctuation Range: 220V – 240V)
- Compressor Load: 1P
- Cooling Capacity: 2063
- Tank Capacity: 10 liters
Main Functions
- Temperature Control: Controls the temperature range with electronic temperature adjustment, featuring digital display of set temperature and actual temperature.
- Protection Features: Includes water temperature overload protection, low water flow sensor protection, and water level indication display.
- High Flow Connections: Utilizes quick-connect fittings for large inlet and outlet water flow.
- Large Capacity Design: Equipped with a large-capacity water tank, a 25-meter lift water pump, and large-diameter piping, suitable for long-distance piping arrangements.
Servo Motors & Drives System
The control cabinet is designed with a robust cooling system to ensure optimal performance and prevent overheating during operation. Additionally, it features a dustproof treatment to protect the internal components from dust and debris, enhancing the longevity and reliability of the system.
The entire equipment is equipped with cutting-edge high-speed EtherCAT servo motors and YASKAWA drive systems, both designed in Germany. This advanced technology not only provides exceptional speed and precision but also contributes to improved energy efficiency and reduced maintenance requirements. The integration of these high-quality components ensures that the system operates smoothly, delivering superior performance for various applications.
Advantages of Space Saver MYD Fiber Laser Cutter
Smaller Footprint, Wider Working Area
-
- The size of the machine is 335″ * 89″ * 86″, and the floor space is reduced by 22.2%. The whole machine can fit into a 40HQ container without the need for a frame container, which saves freight costs.
Hot Wire TIG Cladding System (Split-Type)
Technical Parameters
Device Load
Turntable Diameter
Rotational Speed
Lifting Stroke
Welding Power Supply/Hot Wire Power Supply Brand
Maximum Workpiece Diameter (Outer Diameter)
Minimum Diameter (Inner Diameter Hole)
Sheet Metal Fiber Laser Cutting Machine
Fiber laser tube cutting machine
sheet&tube metal laser cutting machine
Profiles Laser Cutting Machine
Laser Welding Machine
Welding Equipment