News Center

MYD Laser Cutting Machines branding image showcasing advanced industrial laser cutting technology with a focus on precision and innovation.

MYD fiber laser cutting machine: opening up new possibilities for empowering corporate grow

Post date: 2024-10-24


As everyone has discovered, laser technology enriches every aspect of our lives. From the various medical cosmetology that women are familiar with to various large-scale laser cutting equipment. More and more industries are being penetrated by lasers, just as Charles H. Townes wrote in his research paper entitled “The First Laser” ——-Lasers are solutions to many problems.
One of the important uses of lasers is laser cutting. MYD is a leading manufacturer of stainless steel laser cutting machines in China, with decades of experience and development in the field of laser cutting applications. Now let us explore the mysterious world of lasers from the perspective of the author KAYA. Let us take a deep look at these amazing mechanical structures and the mysterious world of light.

Generation of lasers

The principle of laser generation is actually mainly based on stimulated radiation amplification. Simply put, when atoms or molecules are excited by external energy, they will jump from low energy levels to high energy levels, and then release photons when they fall back from high energy levels to low energy levels. Under certain conditions, these photons can excite more atoms or molecules to release photons of the same frequency, forming light amplification and eventually producing lasers.
Based on this principle, after continuous research and experiments by scientists. We finally used the laser to conduct experimental cutting in 1965 by Irish scientist Peter H. Hesketh. This was a new discovery and laid the foundation for subsequent laser technology.
With the development of time, we found that laser cutting has become an important process for metal processing and is widely used in automobile manufacturing, aerospace, machinery manufacturing and other fields. At the same time, laser cutting can also be used in circuit board processing, printing industry, navigation systems and other fields.

Working principle of laser cutting

Simply put, laser cutting is a process of using a focused high-power density laser beam to irradiate the workpiece so that the irradiated material quickly melts, vaporizes, ablates or reaches the ignition point. However, this heat treatment process also requires a rigorous mechanism to achieve precise results. The following will gradually introduce the working principle of laser cutting in detail.
Four key links in the working principle of laser cutting

1. Energy focusing of laser beam

Through focusing and the rational use of magnifying lenses, the laser is focused into a very small and strong light spot (less than 0.1 mm in diameter). At this time, the energy is very concentrated and the material can be quickly heated to a very high temperature.

2. Material phase change and cutting path formation

Metallic materials: The laser melts the metal to form a molten pool by focusing on a high energy point of about 0.1 mm. Auxiliary gases (such as oxygen) promote oxidation reactions and improve cutting efficiency.
Non-metallic materials: The laser directly vaporizes or burns the material, which is suitable for wood, plastic, etc.
When the laser beam moves, a continuous slit will be formed in the high temperature zone, and the slit width is about 0.1 mm.

3. The synergistic effect of auxiliary gases

While cutting, we often use different gases as auxiliary cutting.

3.1. Oxygen

Oxygen is widely used in laser cutting, especially when cutting carbon steel, it is simply “YYDS” (eternal god)!
Many friends always ask why?
Because oxygen can react with metal to produce oxidation, it is equivalent to having its own “small flame”, which makes the cutting speed fast and clean, and can also blow away the slag. However, despite its many advantages, its disadvantages are also easy to show. That is, the surface of the metal after cutting is easily oxidized, the color will turn blue and black, and the surface looks rough. If your workpiece has high requirements for the quality of the cutting surface, then using oxygen may not be a good choice.

3.2 Nitrogen

Nitrogen is a “moderate” inert gas, especially suitable for cutting stainless steel and aluminum alloys. The surface of the workpiece cut by nitrogen is bright as new, and there is no need to worry about oxidation. It is very suitable for delicate work such as stainless steel decoration and precision instrument housing that requires high surface quality. However, since the price of nitrogen is not cheap, if the budget is limited, you need to carefully calculate your cost when using it.

3. 3 Argon

Argon is also a member of the inert gas family, specifically for “difficult materials” with high reflection and high thermal conductivity such as copper and aluminum. It can effectively reduce the reflection of the material to the laser, protect the laser head from damage, and prevent oxidation. However, argon is more expensive than nitrogen, and is generally only used when cutting special materials and customers have extremely high requirements.

3.4 Compressed air

The biggest advantage of air as an auxiliary gas is that it is cheap – the cost is almost negligible, and compressed air can meet the needs directly. When cutting ordinary carbon steel sheets and not requiring high surface quality, air can handle it completely. However, the air contains oxygen, which will cause a certain degree of oxidation during cutting, and the purity is not as good as industrial gas, so the cutting effect is naturally slightly worse.

4. Accurate motion control system

The three-dimensional movement of the cutting head is controlled by G code programming, and the positioning accuracy can reach ±0.05 mm. Complex graphics can be converted into cutting paths by software such as CAD/CAM/DXF to achieve high-precision processing.
Finally, after the combination of these aspects. Materials such as metal sheets, molds or jewelry have achieved perfect molding.
Classification of industrial lasers
With the development of technology, we usually divide lasers into three categories: CO2 laser cutting machine, YAG solid laser cutting machine, and fiber laser cutting machine. Below we classify and introduce these three lasers.
Three types of laser cutting machines

1. CO2 laser cutting machine

Wavelength: 10.6μm
Applicable materials: carbon steel (≤20mm), stainless steel (≤10mm), aluminum alloy (≤8mm), wood, acrylic, plastic and other non-metallic materials
Features:
Can cut thicker metal and non-metallic materials
Photoelectric conversion rate is about 10%, which is relatively low
Using continuous laser, the cutting section is flat
Auxiliary gas (oxygen, nitrogen, compressed air) is required to improve efficiency and incision quality
The power is generally 2000-4000W
High maintenance cost and high power consumption
Application: Medium and thick plate cutting, suitable for large and medium-sized enterprises
Safety level: Level 1, relatively safe

2. YAG solid laser cutting machine

Wavelength: shorter, green laser
Applicable materials: thin sheet metal, especially aluminum, copper and non-ferrous metals, not suitable for non-metallic materials
Features:
Low energy efficiency (<3%)
Low output power (usually below 600W)
Suitable for precision processing, such as punching and spot welding
Low price and simple maintenance
Mainly used in small and medium-sized enterprises and industries with low processing requirements
Applications: sheet metal manufacturing, home appliances, kitchenware, decoration, advertising, etc.
Challenges: Improve power supply stability and life

3. Fiber laser cutting machine

Wavelength: 1.06μm
Applicable materials: metal materials (stainless steel, carbon steel, etc.), not suitable for non-metallic
Features:
High photoelectric conversion rate (>25%), energy saving
Simple maintenance, low failure rate
Fast cutting speed, thin slit, suitable for fine cutting
Short wavelength, great damage to eyes, requires a fully enclosed operating environment
Obvious advantages in thin plate cutting, slightly inferior in thick plate cutting

Why choose fiber laser cutting machine as the first choice?

In the actual production process, we will find that more and more CO2 laser cutting machines are replaced by laser cutting machines. At this time, we can’t help but wonder, what factors led everyone to make this investment decision? What value does it bring to everyone?

1. High photoelectric conversion efficiency

The photoelectric conversion rate of fiber lasers exceeds 25%, which is much higher than CO2 lasers (about 10%) and YAG lasers (less than 3%), which means lower power consumption and more energy-saving operating costs.

2. Fast cutting speed and high efficiency

Especially in the cutting of thin plates (within 4mm), the speed of fiber laser cutting machines is significantly better than other types, which can greatly improve production efficiency.

3. Low maintenance cost and low failure rate

Fiber lasers use optical fiber transmission, simple structure and no need to frequently adjust the optical path, which reduces maintenance difficulty and downtime, and reduces maintenance costs.

4. Good cutting quality and small slits

The fiber laser beam has excellent quality, small focused spot, smooth and delicate cutting section, and meets the needs of high precision and fine processing.

5. Small equipment size and flexible installation

The fiber laser cutting machine is small in size, easy to install and move, and saves space.

6. Wide range of applications

It can efficiently cut a variety of metal materials (stainless steel, carbon steel, aluminum alloy, etc.), meeting most industrial manufacturing needs.

Why choose MYD fiber laser cutting machine?

After continuous technological investment and innovation, we have provided services to 100 companies around the world. So what is the key to choosing us?
We know that the needs of each company are unique. We not only provide differentiated services and solutions in various forms, but also provide outsourcing services and customized equipment configuration. The advantages of choosing MYD laser cutting machine include:

Wide range of material compatibility

Our fiber laser cutting machine is suitable for a variety of materials to meet your diverse processing needs:
 Mild steel and carbon steel: cutting thickness up to 110 mm, smooth edges without burrs.
 Stainless steel: clean and precise cutting edges, ideal for high-end manufacturing industries.
 Aluminum: lightweight and rust-proof, suitable for lightweight parts.
 Copper and brass: easily handle highly reflective metals without any difficulty.

Private customization service

We respect all your private customization requirements. We understand that the problems faced by each customer are different, so the batch-based mass-marketing model is no longer suitable for this market. Our 1-on-1 pre-sales consultation ensures that every one of your requirements can be implemented. And all your needs can be met and fully supported.

1. Color customization

We support color customization. Just like our cars, we also hope that our equipment has unique colors. MYD—-While ensuring that your equipment is strong and powerful, it is more personalized and attractive.

2. Size customization

With the progress of the times, we are no longer satisfied with the cutting of traditional sizes. A series of stereotyped products such as 3015.6015.6020 have long ceased to meet the needs of our customers. Our technical team continues to develop and produce new models that are satisfied by customers. For example, the 12023 super-long gantry machine, the 5-axis H-beam cutting machine, etc.

3. Unique configuration service

Everyone has a different budget and wants to achieve different results. Therefore, we are constantly expanding our product library according to your budget and needs, and no longer let you be discouraged by the price. Be sure that there is always a configuration that can suit you.
When choosing the best stainless steel laser cutting machine, it is crucial to make an informed choice. Be sure to weigh the pros and cons. Take into account its design and maintenance, ease of use, safety features, degree of automation, software adaptability, and budget. With MYDl, you will get the best product in the industry.

Real customer case

A Turkish customer previously relied on outsourcing services such as Send Cut Send for metal cutting, but due to the long production cycle and high costs, he finally ordered a MYD fiber laser cutting machine from our dealer. They shortened the production cycle by 40%, successfully expanded the product line, attracted more customers, and increased annual orders by 80%.
MYD promise: worry-free support from delivery to operation
We not only sell equipment, but also provide comprehensive support and follow-up guarantees to ensure that your equipment is quickly started and runs efficiently:
 On-site installation and commissioning: Engineers provide on-site services to ensure smooth operation of the equipment.
 Comprehensive training: Whether you are a novice or an experienced professional, we provide customized training.
 Lifetime support: Enjoy lifetime telephone, email and remote technical support, worry-free use.

Contact Us

  • Sales Email: fengyiping20@gmail.com

  • Phone: +15852708302

  • Website: www.mydlaser.com

Request A Quote

This value is required!
Please enter a valid email address!
This value is required!